General Cycad Somatic Embryogenesis Protocol


Most of our experiments in the past have focused on species in the genera Zamia and Ceratozamia. While work on these genera is still continuing, we have now expanded our efforts to include: Cycas, Dioon, Encephalartos, Lepidozamia, Macrozamia and Microcycas.

Note: All photographs were taken by Richard Litz.

I. Protocol
II. Media
III. References
IV. Links to Some Cycad Sites


I. Protocol

Young, succulent, non-expanded pinnae are removed from the rachis.

These are surface-sterilized in 5-20% commercial bleach to which a few drops of Tween® 20 have been added. The exact concentration of bleach and Tween® used varies with species and stage of development.

An additional immersion in 70-95% ethanol can be added, especially for extremely hirsute species.

After surface-sterilization, the material is rinsed three times in sterile, deionized water and blotted on sterile paper toweling.

Pinnae can be plated to induction media entire or sliced into segments.

Cultures are maintained in the dark and, generally, transferred monthly.


Embryogenic callus is white to light brown and is friable. Several months may be required for development.

Globular proembryos form in induction media, but develop more rapidly when transferred to Maturation Medium I, which contains no plant growth regulators.


Cycad somatic embryos proliferate and develop well, but cultures are generally not synchronized.

The embryos may be monocotyledonous or dicotyledonous, or the shoot apex may be enclosed in a coleoptile-like sheath.

After root germination, the somatic embryos are transferred individually to test tubes containing a medium with activated charcoal.

Shoot germination occurs in this medium.


II. Media

Unless otherwise specified, all media are solidified with Gel-Gro™ at 2 g/L. All media are adjusted to pH 5.8 before autoclaving.

Basal Induction Medium

This medium consists of Gamborg B5 major salts with MS minor salts and organics, glutamine (400 mg/L) and sucrose (20-60 g/L). Arginine and asparagine (each at 100 mg/L) may also be added.

For Ceratozamia mexicana var. Robusta, the optimal growth regulator combination for callus induction was found to be kinetin (4.7 µ) and 2,4-D (4.5 µ); the best combination for C. hildae was determined to be kinetin (1.2-4.6 µ) and 2,4-D (4.5 µ).

Maturation Medium I

This medium is composed of a modified Gamborg B5 major salts formulation that contains no ammonium nitrate, MS minor salts and vitamins, glutamine (400 mg/L) and sucrose (20-60 g/L).


III. References

Chavez, VM, Litz, RE, Moon, PA and Norstog, K (1992) Somatic embryogenesis from leaf callus of mature plants of the Gymnosperm Ceratozamia mexicana var. Robusta (Miq.)Dyer (Cycadales). In Vitro Cell. Dev. Biol. 28P: 59-63.

Chavez, V, Litz, RE, Vovides, A and Norstog, K (1994) Somatic embryogenesis from leaves of a mature plant of Ceratozamia euryphyllidia (Cycadales, Gymnospermae), an endangered species. VIIIth International Congress of Plant Tissue and Cell Culture, 12-17 June, 1994, Firenze. abstract S11-22.

Litz, RE, Moon, PA and Chavez, VM (1995) Somatic embryogenesis from leaf callus derived from mature trees of the cycad Ceratozamia hildae Gynmospermae. Plant Cell, Tissue and Organ Culture 40: 25-31.

Litz, RE, Chavez, VM and Moon, PA (1995) Somatic Embryogenesis in the Cycadales. IN: Jain, S, Gupta, P and Newton, R (eds.) Somatic Embryogenesis in Woody Plants, vol. 3. pp. 1-15. Kluwer Academic Publishers, Dordrecht.


IV. Links to Some Cycad Sites

The Cycad Society
The Cycad Pages
The Virtual Cycad Encyclopedia
Gymnosperm Database Home Page
Palm and Cycad Societies of Australia
Introduction to the Cycads (UC-Berkeley)
Yahoo Groups -- home of the Cycad Listserv


go back to the Plant Tissue Culture at TREC Page



If you have any questions or comments about cycad tissue culture, please send them to Pamela Moon.